新闻资讯

首页>>新闻资讯

怎么去更换加长臂挖掘机的液压油!

日期:2019-10-17   来源:http://www.dyqicheng.com/
  挖掘机是我们工程建设中常用的机械设备。 近年来,随着农村和城镇的发展,挖掘机的使用在增加,挖掘机零件的合作非常重要。 挖掘机延伸臂是挖掘机的组件之一,可用于许多应用中。
  Excavator is a common mechanical equipment in our engineering construction. In recent years, with the development of China's rural and urban areas, the use of excavators is increasing, and the cooperation of excavator parts is very important. Excavator extension arm is one of the components of excavator, which can be used in many applications.
  在使用挖掘机和长臂进行日常工作之后,我们需要对其进行维护工作。 更换液压油也是非常重要的部分。 接下来,我们将为大家介绍更换挖掘机和长臂液压油的方法。 参考。
  After using excavators and long arms for daily work, we need to maintain them. Changing the hydraulic oil is also a very important part. Next, we will introduce the method of changing excavator and long arm hydraulic oil. Reference resources.
  1.为整个车辆液压系统购买机油。  (液压油箱容积的2.5倍),过滤器元件,清洗油,3千克面粉,绳索,密闭的液压油管的油塞(由挖掘机上的油管形成,用于换油),蒸汽泵 还有一个空的油桶。 准备普通的挖掘机。 换油挖掘机的起重臂升高到点,在斗杆和铲斗接收到内点之后,发动机熄灭(动臂油缸,斗杆油缸和铲斗油缸的油缸杆均突出到顶点)  。
  1. Purchase oil for the entire vehicle hydraulic system. (2.5 times the volume of hydraulic oil tank), filter element, cleaning oil, 3kg flour, rope, oil plug of closed hydraulic oil pipe (formed by oil pipe on excavator for oil change), steam pump and an empty oil barrel. Prepare a normal excavator. The boom of the oil change excavator rises to the highest point, and the engine goes out after the stick and bucket receive the inner point (boom cylinder, stick cylinder and bucket cylinder rod protrude to the top).

  2.液压油箱的清洁:排空油箱中的所有液压油,抽出液压滤清器,从泵的接口拆卸泵与油箱之间的管路,并释放管路中的油。 用清洗油冲洗液压油箱和油管。 用沙布擦拭液压油箱的内部。 将面粉和面粉在可拉伸表面的范围分成三部分,然后将面团粘三遍以清洁液压油箱的内部,尤其是在油箱和滤芯的角落。 清洁液压油箱和滤芯。 更换新的液压滤清器并放上盖子。
  2. Cleaning of hydraulic oil tank: drain all hydraulic oil in the tank, draw out the hydraulic filter, remove the pipeline between the pump and the tank from the pump interface, and release the oil in the pipeline. Wash the hydraulic oil tank and oil pipe with cleaning oil. Wipe the inside of the hydraulic tank with a sand cloth. Divide the flour and flour into three parts within the stretch surface, then stick the dough three times to clean the inside of the hydraulic tank, especially in the corner of the tank and filter element. Clean the hydraulic tank and the filter element. Replace the hydraulic filter with a new one and put on the cover.
  以上是挖掘挖掘机的长臂液压油的方法。 为了使我们的挖掘机臂伸得更灵活,这个过程不能少! 我希望每个人在阅读本文后都能有所收获,更好使用挖掘机加长臂,以便挖掘机可以更长的时间使用长臂。
  The above is the method of excavating the hydraulic oil of the long arm of the excavator. In order to make our excavator arm more flexible, this process can not be less! I hope everyone can get something after reading this article. It's better to use excavator with long arm, so that excavator can use long arm for a longer time.

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】