新闻资讯

首页>>新闻资讯

加长臂挖掘机抓斗加固方法有哪些?

日期:2021-11-09   来源:http://www.dyqicheng.com/
长臂挖掘机是装在挖掘机臂上的一种特殊的工作装置。可以很好的扩展其作业半径,更好的进行工作。在河道挖掘、水利工程中应用比较普遍。长臂挖掘机是很多工程施工需要的,而对于长臂挖掘机的挖斗加固所需要注意的地方,下面加长臂挖掘机厂家为大家详细介绍这个问题。
Long arm excavator is a special working device installed on the excavator arm. It can well expand its operation radius and work better. It is widely used in river excavation and water conservancy projects. Long arm excavators are needed for many engineering construction, and the bucket reinforcement of long arm excavators needs attention. The manufacturer of extended arm excavators will introduce this problem in detail.
加长臂挖掘机抓斗加固方法: 齿根处的加强保护:长臂挖掘机齿根安装板的加强非常有必要,如果在此处的加强不好,会导致磨损将剧烈,牙齿怎么也装不上去了。对于此处的加固可以采取两种方案,一种是贴加强筋,一种是包耐磨块。需要注意的是,贴加强筋的做法简便,经济,但是焊 接时要注意不能与齿根的焊缝产生叠焊,这样会影响齿根焊 接强度。 加长臂挖掘机 边板及侧边加强:边板的剧烈磨损会使挖斗的斗容减小,影响生产力。同时,边刀也起到利于切入物料,保护边板的效果,所以挖斗需安装边刀。
Reinforcement method of grab bucket of extended arm excavator: strengthen the protection at the tooth root: it is very necessary to strengthen the tooth root mounting plate of long arm excavator. If the reinforcement here is not good, it will cause severe wear, and the teeth can't be installed. For the reinforcement here, two schemes can be adopted, one is to stick stiffeners and the other is to wrap wear-resistant blocks. It should be noted that the method of attaching stiffeners is simple and economical, but it should not be overlapped with the weld of the tooth root during welding, which will affect the welding strength of the tooth root. Side plate and side reinforcement of lengthening arm excavator: severe wear of side plate will reduce the bucket capacity of bucket and affect productivity. At the same time, the edge knife also has the effect of cutting in materials and protecting the edge plate, so the bucket needs to be installed with the edge knife.
加长臂挖掘机租赁
长臂挖掘机由于侧边并不是高磨损区,故侧边的加强不用太坚固,以免影响挖斗的整体重量。 底板加强:底板加强是非常有必要的。底板的加强筋要选择坚硬、耐磨的长型板材做原料,要保护挖斗的整体形状,以免影响切入角度,影响产能。加强筋的焊 接要顺着原机筋板焊 接的方向,在两块板上叠焊。
Since the side of the long arm excavator is not a high wear area, the reinforcement of the side need not be too strong to avoid affecting the overall weight of the bucket. Floor reinforcement: floor reinforcement is very necessary. The stiffener of the bottom plate shall be hard and wear-resistant long plate as raw material, and the overall shape of the bucket shall be protected to avoid affecting the cutting angle and production capacity. The welding of stiffeners shall be overlapped on the two plates along the welding direction of the original stiffener plate.
加长臂挖掘机能够作业的范围广,避免了挖掘机的来回移动,提高施工的效率。而且有的时候有的地方挖掘机是不能进入的,这个时候长臂挖掘机就比普通的挖掘机更加的实用。
The extended arm excavator can operate in a wide range, avoid the back and forth movement of the excavator and improve the construction efficiency. And sometimes excavators in some places can't enter. At this time, long arm excavators are more practical than ordinary excavators.
在很多行业都有了广泛的使用,像地铁修建,护坡的一些修建都要使用到长臂挖掘机,需求是不断增加的,为了提升施工效率,做好挖掘机抓斗加固非常重要。 以上就是今天为大家分享的关于加长臂挖掘机抓斗加固方法的相关内容,相信大家看后也会有所收获,同时也提醒大家在使用过程中要注意维护保养,定期检查维修,以免出现故障影响使用
It has been widely used in many industries, such as subway construction and slope protection. The demand for long arm excavators is increasing. In order to improve the construction efficiency, it is very important to strengthen the grab of excavators. The above is the relevant content about the grab reinforcement method of the extended arm excavator shared for you today. I believe you will gain something after watching it. At the same time, it also reminds you to pay attention to maintenance and regular inspection and repair in the process of use, so as to avoid failure affecting the use

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】