新闻资讯

首页>>新闻资讯

挖掘机磨合期怎么做好保养措施?

日期:2018-06-28   来源:http://www.dyqicheng.com/
1、由于工程机械是特殊车辆,操作人员应接受生产厂家的培训、指导,对机器的结构、性能有充分的了解,并获得一定的操作及维护经验方可操作机器。生产厂家提供的产品使用维护说明书,是操作者操作设备的必备资料,在操作机器前,一定要先阅读使用维护说明书,按说明书的要求进行操作、保养。
1. Because the engineering machinery is a special vehicle, the operator should receive training and guidance from the manufacturer, have a full understanding of the structure and performance of the machine, and obtain certain operating and maintenance experience to operate the machine. The production and maintenance instructions provided by the manufacturer are the necessary information for the operator to operate the equipment. Before operating the machine, we must read the maintenance instructions first, and operate and maintain the instructions according to the requirements of the instructions.
2、注意磨合期的工作负荷,磨合期内的工作负荷一般不要超过额定工作负荷的80%,并要安排适合的工作量,防止机器长时间连续作业所引起的过热现象的发生。
2. Pay attention to the working load during the running in period. The working load in the running in period is generally not more than 80% of the rated working load, and the suitable amount of work should be arranged to prevent the overheating phenomenon caused by the continuous operation of the machine for a long time.

3、注意经常观察各仪表指示,出现异常,应及时停车予以排除,在原因未找到,故障未排除前,应停止作业。
3, pay attention to frequently observe the instrument instructions, abnormal, should be stopped in time to exclude, the cause is not found, failure is not ruled out before, should stop operation.
4、注意经常检查润滑油、液压油、冷却液、制动液以及燃油油(水)位和品质,并注意检查整机的密封性。检查中发现油水缺少过多,应分析原因。同时,应强化各润滑点的润滑,建议在磨合期内,每班都要对润滑点加注润滑脂(特殊要求除外)。
4, pay attention to checking the lubricating oil, hydraulic oil, coolant, brake fluid and fuel oil (water) regularly, and check the tightness of the whole machine. It is found that there is too much oil and water in the inspection, and the reason should be analyzed. At the same time, the lubrication of each lubricating point should be strengthened. It is suggested that lubricating grease should be added to each lubrication point during the running in period (except for special requirements).
5、保持机器清洁,及时调整、紧固松动的零部件,以防因松动而加剧零部件的磨损或导致零部件丢失。
5, keep the machine clean, adjust and fasten loose parts in time to prevent wear and tear or loose parts.
6、磨合期结束,应对机器进行强制保养,做好检查和调整工作,同时注意油液的更换。
6. When the running in period is over, the machine should be forced to maintain, check and adjust, and pay attention to the replacement of the oil.
以上就是给大家分享的内容了,想要了解更多的精彩内容请点击进入我们的网站http://www.dyqicheng.com,或者是搜索我们的加长臂挖掘机出租关键词查找,我们会有更多的精彩内容与您分享!
The above is to share the content, to understand more interesting content please click into our official website http://www.dyqicheng.com, or search our long arm excavator rental keyword search, we will have more wonderful content to share with you!

【本站图片均由网站所有方提供,部分图片来源于网络,如无意中侵犯了某媒体或个人的知识产权,请来信或来电告之,本网站将立即删除。】